From 11:00 PM CST Friday, May 9th - 3:00 PM CST Saturday, May 10th, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.



DAQmx에서 DSA 디바이스의 IEPE Excitation을 활성화시키는 방법



하드웨어: Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA), Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PXI-4461, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PXI-4462, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PCI-4462, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PCI-4461, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA), Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PXI-4461, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PXI-4462, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PXI-4472, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PXI-4472B, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PXI-4474, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PCI-4472, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PCI-4474, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PCI-4461, Modular Instruments>>Dynamic Signal Acquisition and Analysis (DSA)>>PCI-4462

문제점:
PXI-4462를 이용하여 마이크로폰을 이용한 Sound Level 측정을 수행하고 있습니다. 이 마이크로폰은 IEPE / ICP Excitation을 필요로 합니다. LabVIEW를 이용하여 채널별로 IEPE Excitation을 On/Off할 수 있습니까?

솔루션:
채널 별로 다른 IEPE 셋팅을 설정하는 방법에는 여러 가지가 있습니다.

가장 쉬운 방법은 DAQmx Create Channel VI에서 측정 타입으로 "Microphone"나 "Accelerometer" 을 선택해주는 것입니다. 그러면 자동으로 AC-coupled와 필요한 current excitation이 설정됩니다.

측정 타입으로 "Voltage”을 선택했을 경우에는 DC-coupled가 Default이고, DAQmx channel property node를 이용하여 IEPE excitation을 활성화시켜야 됩니다.



만약 채널 별로 다른 설정을 적용하고자 한다면, DAQmx channel을 각각 다르게 생성시켜줘야 됩니다.
한 개의 DAQmx task 안에서 서로 다른 DAQmx channel들을 설정할 수 있습니다. 예를 들어, 세 개의 마이크로폰과 한 개의 전압 입력을 받을 경우, DAQmx Create Channel VI를 이용하여 마이크로폰 측정 타입 한 개와 전압 측정 타입 한 개를 만들어주면 됩니다. 이 마이크로폰 측정 채널이 실제적인 세 개의 마이크로폰 측정에 사용됩니다.
아래 링크에 있는 예제 코드를 참고하여, 어떻게 같은 Task 속에서 서로 다른 측정 타입을 사용할 수 있는 지 배울 수 있을 것입니다.

주의: NI 445x과 NI 455x 디바이스들은 DAQmx를 지원하지 않습니다.

관련 링크:
Developer Zone Example: Creating an Analog Input Task with Multiple Measurement Types
KnowledgeBase 292AIT2L: How Do I Enable IEPE Excitation on My DSA Device Using Traditional DAQ?

첨부:





리포트 날짜: 12/15/2004
마지막 업데이트: 12/28/2007
문서 번호: 3GEF55NQ


Tariff Impact Update Learn more