Home
Support
¿Cómo Puedo Cambiar el Tamaño del Buffer de Serial en LabVIEW?
¿Cómo Puedo Cambiar el Tamaño del Buffer de Serial en LabVIEW?
Software Primario: LabVIEW Development Systems>>LabVIEW Base Package
Versión de Software Primario: 7.1
Versión de Software Primario Corregido: N/A
Software Secundario: N/A
Problema:
Necesito establecer un valor para el tamaño del buffer del puerto serial en LabVIEW. ¿Qué VIs debo utilizar y donde están localizados?
Solución: Hay dos opciones para realizar esto. Si usted está utilizando funciones primitivas de serial, puede utilizar los siguientes VIs:
- LabVIEW 5.x: Functions » Instrument I/O » Serial » Serial Port Init.vi
- LabVIEW 6.x: Functions » Instrument I/O » I/O Compatibility » Serial Compatibility » Serial Port Init.vi
- LabVIEW 7.x: Functions » All Functions » NI Measurements » Fieldpoint » Fieldpoint RT » Serial » Serial Port Init.vi
Si está utilizando funciones de VISA, debe utilizar estos VIs:
- LabVIEW 5.x: Functions » Instrument I/O » VISA » Interface Specific » VISA Set Serial Buffer Size.vi
- LabVIEW 6.x: Functions » Instrument I/O » VISA » VISA Advanced » Interface Specific » VISA Set I/O Buffer Size.vi
- LabVIEW 7.x: Functions » All Functions » Instrument I/O » VISA » VISA Advanced » Bus/Interface Specific » VISA Set I/O Buffer Size.vi
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.