From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Example Code
Products and Environment
This section reflects the products and operating system used to create the example.To download NI software, including the products shown below, visit ni.com/downloads.
- Modular Instrumentation
Hardware
- LabVIEW
Software
- Other
Driver
Code and Documents
Attachment
Overview
This example is a modified version of the Configured Acquisition example available for NI-Scope devices.
Description
This application allows the user to set up a disabled channel for use as an analog reference trigger source (edge, window, or hysteresis). This example is most useful for NI-Scope devices that do not have an available Trig connector on the front panel of the device. However, this functionality is generic enough to be used with any NI-Scope device. For more information on this functionality, please refer to the Knowledge Base article entitled Using a Disabled Channel to Trigger Acquisition with NI-Scope.
Requirements
- LabVIEW 2012 (or compatible)
- NI-SCOPE
Steps to Implement or Execute Code
- Compete device configuration, like Resource Name , Channel(s) to Acquire and Trigger settings..
- Run the application
Additional Information or References
VI Snippet
**This document has been updated to meet the current required format for the NI Code Exchange.**
Example code from the Example Code Exchange in the NI Community is licensed with the MIT license.
