Home
Support
我應該怎麼在LabVIEW 8.20中安裝NI SoftMotion Development Module 1.1?
我應該怎麼在LabVIEW 8.20中安裝NI SoftMotion Development Module 1.1?
主要軟體:
主要軟體版本: 1.0
主要軟體修正版本:
次要軟體: N/A
問題: 我正在使用LabVIEW 8.20,當我裝完NI SoftMotion Development Module 1.1後,我發現打開VI,查詢範例和下載相關文件到RT時有問題
解答: 請根據以下步驟來在LabVIEW 8.20中安裝NI SoftMotion Development Module 1.1 版本:
- 首先確認您已經安裝NI LabVIEW 8.20,LabVIEW RT 8.20和LabVIEW FPGA 8.20(可選)。
- 如果您已經安裝過NI SoftMotion Development Module 1.1,那麼您必須首先將其移除安裝。然後再按照下面的步驟安裝:
- 啟動NI SoftMotion Development Module 1.1安裝檔。
- 按Next。
- 輸入姓名、公司和產品序列號並按Next。
- 按Custom,然後按Next。
- 按 CTRL + SHIFT + A 以顯示隱藏的安裝配置資訊。
- 按LabVIEW 8.0 Support。
- 使用瀏覽按鈕來選擇您的LabVIEW 8.20的安裝目錄,預設的路徑是:
C:\Program Files\National Instruments\LabVIEW 8.20<\code>。
按LabVIEW 8.0 Support旁邊的"X"並選擇Install this feature and its subfeatures to a local drive。
按LabVIEW Real-Time Target Support旁邊的"X"並選擇Install this feature to a local drive。
按LabVIEW Real-Time Target Support旁邊的"X"以顯示隱藏的安裝配置資訊。
按Trajectory Generator for LabVIEW RT旁邊的"X"並選擇Install this feature to a local drive.
按Next。
根據螢幕顯示完成剩下的安裝。
相關連結: KB 2V97P72H: Uninstalling NI Software
KB 3DQGQUL6: What Is SoftMotion?
附加檔案:
報告日期: 09/30/2006
最後更新: 12/20/2006
文件偏號: 41QHA4FL
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.