From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.



用NI-DAQmx或者NI-DAQmx base来使用USB-6008/9和USB-6501



硬件: Multifunction DAQ (MIO)>>Portable>>USB-6008, Multifunction DAQ (MIO)>>Portable>>USB-6009, Digital I/O (DIO)>>Static>>USB-6501, Digital I/O (DIO)>>Static>>USB-6501, Multifunction DAQ (MIO)>>Portable>>USB-6008, Multifunction DAQ (MIO)>>Portable>>USB-6009

问题: 我过去一直用NI-DAQmx base来使用USB-6008/9和USB-6501,现在我想用NI-DAQmx 7.5来使用。我应该如何配置这个设备才能使用NI-DAQmx呢?

解答: 在Measurement & Automation Explorer (MAX),您可以切换USB-6008/9和USB-6501所使用的驱动。它允许您从NI-DAQmx base切换到NI-DAQmx,反之亦然。操作如下,选择Tools>>NI-DAQmx Configuration>>NI-DAQmx USB Driver Selecto,选中设备,点击切换按钮,切换到您想要使用的驱动,然后点击OK。 

注意:只有您同时安装有NI-DAQmx base 1.4及以上版本和NI-DAQmx 7.5及以上版本,这个选项才会在MAX中出现。

相关链接:
Drivers and Updates: Multifunction DAQ
KnowledgeBase [3NE7GJMY]: Why can't I see my USB-6008, -6009, or -6501 under "DAQmx Devices" in MAX after installing NI-DAQmx 7.5 or later?

附件:





报告日期: 05/16/2006
最近更新: 05/19/2006
文档编号: 3N8FE0N5