SCXI-1349 和 SCXI-1346的接出引脚
硬件: Wireless Sensor Network>>WSN Gateways>>NI 9792>>Switch Controller>>4 Slot USB Mainframe>>Terminal Blocks
|
||||||||||||||||||||||||||||||||||||||||||||||||||
问题: 68引脚E系列多功能输入输出板卡的引脚如何对应到SCXI-1349 和SCXI-1346的50引脚？
解答:
| 68-pin E-Series Line Name | 68-pin E-Series Pin Number | 50-pin Breakout Connector Pin Number |
| AIGND | 24* | 1 |
| AIGND | 24* | 2 |
| ACH0 | 68 | 3 |
| ACH8 | 34 | 4 |
| ACH1 | 33 | 5 |
| ACH9 | 66 | 6 |
| ACH2 | 65 | 7 |
| ACH10 | 31 | 8 |
| ACH3 | 30 | 9 |
| ACH11 | 63 | 10 |
| ACH4 | 28 | 11 |
| ACH12 | 61 | 12 |
| ACH5 | 60 | 13 |
| ACH13 | 26 | 14 |
| ACH6 | 25 | 15 |
| ACH14 | 58 | 16 |
| ACH7 | 57 | 17 |
| ACH15 | 23 | 18 |
| AISENSE | 62 | 19 |
| DAC0OUT | 22 | 20 |
| DAC1OUT | 21 | 21 |
| EXTREF | 20 | 22 |
| AOGND | 54,55 | 23 |
| DGND | 4** | 24 |
| DIO0 | 52*** | 25 |
| DIO4 | 19*** | 26 |
| DIO1 | 17*** | 27 |
| DIO5 | 51 | 28 |
| DIO2 | 49*** | 29 |
| DIO6 | 16 | 30 |
| DIO3 | 47 | 31 |
| DIO7 | 48 | 32 |
| DGND | 4** | 33 |
| +5V | 8,14 | 34 |
| +5V | 8,14 | 35 |
| SCANCLK | 46 | 36 |
| EXTSTROBE | 45 | 37 |
| PFI0/TRIG | 11 | 38 |
| PFI1/TRIG | 10 | 39 |
| PFI2/CONVERT | 43 | 40 |
| PFI3/GPCTR1_SOURCE | 42 | 41 |
| PFI4/GPCTR1_GATE | 41 | 42 |
| GPCTR1_OUT | 40 | 43 |
| PFI5/UPDATE | 6 | 44 |
| PFI6/WFTRIG | 5 | 45 |
| PFI7/STARTSCAN | 38 | 46 |
| PFI8_GPCTR0_SOURCE | 37 | 47 |
| PFI9_GPCTR0_GATE | 3 | 48 |
| GPCTR0_OUT | 2 | 49 |
| FREQ_OUT | 1 | 50 |
*在E系列板卡中，也和引脚 27, 29, 32, 56, 59, 64, 67 相连
**在E系列板卡中，也和引脚 7, 9, 12, 13, 15, 18, 35, 36, 39, 44, 50, 53 相连
***用于控制SCXI机箱的数字线。
注意: SCXI-1346和SCXI-1349接出信号只能用于与SCXI-1180 穿通面板
相关链接: National Instruments: SCXI Support Page
Product Manuals: SCXI-1349 Shielded Cable Installation Guide
Product Manuals: SCXI-1346 Shielded Multi-Chassis Cable Adapter Installation Guide
Product Manuals: SCXI-1180/1181 User Manual
附件:
|
||||||||||||||||||||||||||||||||||||||||||||||||||
报告日期: 05/01/2001
最近更新: 06/06/2004
文档编号: 290H4RCR