Home
Support
왜 Measurement & Automation Explorer상에 Traditional NI-DAQ 디바이스 폴더가 보이지 않나요?
왜 Measurement & Automation Explorer상에 Traditional NI-DAQ 디바이스 폴더가 보이지 않나요?
주요한 소프트웨어:
주요한 소프트웨어 버전: 7.0
문제가 해결된 소프트웨어 버전:
부차적인 소프트웨어: Driver Software>>NI-DAQmx
하드웨어: Multifunction DAQ (MIO)
문제점: NI-DAQ 7.0을 설치 한후에 NI-DAQmx디바이스 폴더 아래 디바이스엔 인터페이스에는 장비가 확인 됩니다.
하지만 Traditional NI-DAQ 디바이스에는 보이지 않습니다.
왜 Measurement & Automation Explorer상에 Traditional NI-DAQ 디바이스 폴더가 보이지 않나요?
솔루션: 컴퓨터상에 Traditional NI-DAQ 디바이스가 설치되지 않을 경우 이런 현상은 종종 발생 합니다.
새로이 출시 되는 여러 데이터 취득 장비 예를 들어 PCI-6509같은 경우 NI-DAQmx만 지원 합니다.
NI-DAQ드라이버 지원관련 아래의 링크를 참고 하시길 바랍니다. 드라이버와 데이터 취득장치간의 지원 관계를 설명 해두었습니다.
관련 링크: What is NI-DAQmx?
NI-DAQ Driver Support for Windows
Why Won't My DAQmx Folder Show Up in MAX?
첨부:
리포트 날짜: 01/16/2004
마지막 업데이트: 02/18/2005
문서 번호: 35FE4RVM
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.