|
改进和问题修正
NI-488.2 3.1.2
本次发布对多个影响MAX稳定性的问题进行修复。
ID |
说明信息 |
379939 |
An exception could be reported by the System Configuration API when initializing the ni4882 plugin if the NI Configuration Manager service is not running. This could result in a crash of any application using the System Configuration API or be reported as unhandled exceptions in niGPIBsys.dll when using MAX. |
373644 |
Several issues have been resolved when scanning for instruments in MAX. These issues may have caused MAX to crash or the discovered GPIB instruments to be displayed incorrectly. |
NI-488.2 3.1.1
本次发布包含对Windows 8支持的改进。
NI-488.2 3.1
本次发布增加对Windows 8的支持,并修复了以下问题。
ID |
说明信息 |
351266 |
NI-488.2 for Windows, Version 3.1, adds support for direct entry into ni4882.dll. Previously there was only support for gpib-32.dll. |
311091 |
In certain PXI Express chassis, the performance of GPIB writes through PXI-GPIB interfaces is very slow. This has been fixed. |
370676 |
When disconnecting a USB hub with GPIB hardware connected, the GPIB hardware will not be properly removed from the system. This will prevent the use of the device until the system is rebooted. During the following reboot or shutdown, a blue screen error may occur. This has been fixed. |
371371 |
When disconnecting a USB hub shortly after connecting a GPIB-USB-HS to the hub, a blue screen error may occur immediately. This has been fixed. |
144103 |
Removing PCMCIA-GPIB interfaces while Windows is hibernated or suspended causes blue screen error during resume. This has been fixed. |
122048 |
GPIB interface remains in locked state after the locking process is terminated unexpectedly. This generates an ELCK error on subsequent attempts to open the interface. This problem impacted all USB based GPIB interfaces. This has been fixed. |
最新版本的NI-488.2既可通过NI更新服务获得,也可通过下列“驱动和更新”链接下载。
|