SCXI 와 SCC 에 대한 DAQmx Base의 지원
주요한 소프트웨어:
주요한 소프트웨어 버전: 2.0
문제가 해결된 소프트웨어 버전:
부차적인 소프트웨어: LabVIEW Development Systems>>LabVIEW Full Development System, LabVIEW Development Systems>>LabVIEW Professional Development System
하드웨어: SCXI
문제점: DAQmx Base에서 SCXI 또는 SCC 모듈을 사용할 수 있습니까?
솔루션: 시그널 컨디셔닝은 공식적으로 NI-DAQmx Base에서 지원되지 않습니다.
SCXI 모듈은 지원되지 않으므로 NI-DAQmx Base Configuration Utility에서 보이지 않습니다. SCXI의 멀티 플렉싱 기능 때문에 NI-DAQmx Base 에서는 SCXI 모듈을 사용할 수 없습니다.
SCC모듈은 NI-DAQmx Base Configuration Utility 에서 보이지는 않지만, 어떤 경우에는 사용할수 있습니다. SCC모듈을 NI-DAQmx Base에서 사용하기 위해서는 모듈을 무시하고 신호의 이후 컨디셔닝된 범위로 태스크의 범위를 설정하시면 됩니다.
참고: 이 방법은 컨디셔닝된 범위가 DAQ보드의 최대범위보다 작을때만 사용가능 합니다.
관련 링크: Product Manuals: NI-DAQmx Base 2.x Getting Started Guide
Product Manuals: Getting Started with NI-DAQmx Base for Linux and Mac Users
Drivers and Updates: Multifunction DAQ
첨부:
리포트 날짜: 01/26/2005
마지막 업데이트: 07/10/2006
문서 번호: 3HPGL3XR
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.