在MAX中加入WLS或ENET的C系列模块时出现 Error -201247的错误
硬件: CompactRIO>>Digital Input Modules>>NI 9421
问题: 我有WLS-9163或ENET-9163,里面插入C系列模块。在MAX中我可以找到设备,但当我想添加发现的设备时,我得到以下错误:
Error -201247 occurred at Add Networked DAQ Devices...
Possible reason(s):
Measurements: Device cannot be created in MAX because a driver could not be found for the device. You may need to upgrade NI-DAQmx.
解答: 这个错误是由于在WLS/ENET-9163中添加了不支持的C系列模块。如WLS/ENET-9163的产品说明中所说,它们支持的C系列模块是:
NI-DAQmx 8.8 支持五种模块
- NI 9211 (4-通道 14 S/s, 24-bit, ±80 mV 热电偶输入)
- NI 9215 (4-通道, 100 kS/s/ch, 16-bit, ±10 V 模拟输入)
- NI 9219 (4-通道, 100 S/s/ch, 24-bit, ±60 V, ±25 mA 通用输入)
- NI 9234 (4-通道, 51.2 kS/s/ch, 24-bit, ±5 V IEPE 输入)
- NI 9237 (4-通道, 50 kS/s/ch, 24-bit, ±25 mV/V 电桥应变片输入)
NI-DAQmx 8.9 加入了以下三个模块的支持:
- NI 9421 (8-通道 24 V Logic, 100 µs, Sinking 数字输入模块)
- NI 9472 (8-通道 24 V Logic, 100 µs, Sourcing 数字输出模块 Module)
- NI 9481 (4-通道 继电器 [30 VDC (2 A), 60 VDC (1 A), 250 VAC (2 A)])
NI-DAQmx 9.0 以下三个模块的支持:
- NI 9205 (32-通道 ±200 mV to ±10 V, 16-Bit, 250 kS/s 模拟输入模块)
- NI 9206 (16-通道 ±200 mV to ±10 V, 16-bit, 燃料电池模拟输入模块)
- NI 9213 (16-通道 热电偶输入模块)
相关链接: NI WLS-9163NI ENET-9163NI-DAQ 8.8 ReadmeNI-DAQ 8.9 ReadmeNI WLS/ENET-9163 User Guide and SpecificationsNI-DAQmx for the WLS/ENET-9163 Getting Started Guide
附件:
报告日期: 10/21/2008
最近更新: 12/29/2009
文档编号: 4QK6SL53
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.