LabVIEW 7.0에서 NI-DAQmx 예제 사용하기
주요한 소프트웨어:
주요한 소프트웨어 버전: 7.0
문제가 해결된 소프트웨어 버전: N/A
부차적인 소프트웨어:
문제점: LabVIEW 7.0에서 NI-DAQmx 예제를 사용하려면 어떻게 해야 합니까?
솔루션: LabVIEW 7.0에서 LabVIEW Examples Finder를 열어서 NI-DAQmx 예제를 찾을 수 있습니다. LabVIEW Examples Finder를 여는 방법에는 두가지가 있습니다.
- LabVIEW 7.0 실행 시 나타나는 창에서, Open 버튼의 아래방향 화살표를 클릭 한 후, Examples를 선택하십시오.
- LabVIEW 7.0 실행 후, 메뉴에서 Help»Find Examples를 선택하십시오..
LabVIEW Example Finder에서
Hardware Input and Output»DAQmx을 선택하십시오. 만약 인터넷에 연결되어 있는 컴퓨터라면, LabVIEW Example Finder는 ni.com 웹사이트에서도 NI-DAQmx 예제를 검색할 것입니다. 뿐만 아니라 Example Finder 좌측 하단에 사용하고자 하는 하드웨어를 선택할 수도 있습니다. 하드웨어를 선택하고 나면, 특정한 장치를 지원하는 예제에는 그 옆에 아이콘이 나타나는 것을 볼 수 있을 것입니다.
120개가 넘는 NI-DAQmx 예제들이 아래의 범주로 구분되어 있습니다.
Analog GenerationAnalog Measurements- Acceleration
- Current
- Frequency
- Position
- Resistance
- Slow Varying Voltage Signals
- Strain
- Temperature
- Voltage
Counter Measurements- Count Digital Events
- Digital Frequency
- Period or Pulse Width
- Position
- Two-Signal Edge-Separation
Digital Generation
Digital Handshaking
Digital Measurements
Generating Digital Pulses
Switches
Synchronization- Multi-Device
- Multi-Function
관련 링크:
첨부:
리포트 날짜: 05/16/2003
마지막 업데이트: 04/22/2004
문서 번호: 2XFEB4N5
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.