Home
Support
使用 Timed Loops 於 Real-Time Communications Wizard
使用 Timed Loops 於 Real-Time Communications Wizard
主要軟體:
主要軟體版本: 8.5
主要軟體修正版本:
次要軟體: N/A
問題: 在 RT Communications Wizard 中,我可否使用 Timed Loops 做為 time-critical loop?
解答: RT Communications Wizard 的作法是使用 Timed Loop,並正確地轉換出三個VI:time-critical loope(TCL)、normal-priority loop(NPL)以及 host。唯一的問題是 TCL 將被設定為 time-critical 狀態,不論其原本的狀態。如此將產生 Timed Loop 與周圍程式間優先權顛倒的問題。為了解決這個問題,請將 TCL 換回它的 normal priority。欲取得更多有關 Timed Loops 使用於 time-critical 程式的資訊,請見下方連結的 KB 3AGENOFL。
相關連結:
附加檔案:
報告日期: 02/23/2004
最後更新: 12/26/2008
文件偏號: 36MHIRPK
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.