From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.



Archived: 运行校准执行程序时出现错误-1074130425

This document has been archived and is no longer updated by National Instruments



主要软件:
主要软件版本: 3.0
主要软件修正版本: N/A
次要软件: Instrument Drivers/IVI

问题:

当我尝试运行Calibration Executive 3.0时,收到以下错误消息

Error -1074130425: "Item Does Not Exist in the Collection"。

为什么会发生这种情况?



解答:

如果IVI仪器驱动软件模块配置不正确,尝试运行校准执行程序时可能会出现此错误。 此错误可通过以下步骤解决(这些步骤适用于PXI-4060 DMM,但对于使用IVI驱动程序的所有设备应该类似):

1.在Measurement and Automation Explorer (NI MAX)中,导航到IVI Drivers >> Advanced >> Instrument Driver Software Modules>> NIDMM

2.不正确的信息将位于General Tab中的Published API's 下。 下表列出了正确的配置信息。

Name Version Type
IviDmm 3.0 IVI-C
IviDriver 1.0 IVI-C

3.单击Save IVI Configuration以应用更新。



相关链接: White Paper: Getting Started Using National Instruments IVI with LabVIEW or LabWindows/CVI
White Paper: Using IVI Drivers to Build Hardware-Independent Test Systems with LabVIEW and LabWindows/CVI
,
White Paper: Getting Started Using National Instruments IVI with LabVIEW or LabWindows/CVI
White Paper: Using IVI Drivers to Build Hardware-Independent Test Systems with LabVIEW and LabWindows/CVI

附件:





报告日期: 12/15/2004
最近更新: 11/09/2016
文档编号: 3GEEH79O