Calibrating the Touch Screen on Windows

Take the following steps to calibrate the motion of the touch screen cursor with a touch screen pen or finger.
  1. Ensure the monitor is properly connected through an RS-232 or USB cable.
  2. Ensure the touch screen driver is properly installed.
  3. Click the PenMount icon in the bottom left corner of the screen, as shown the following figure, and select Control Panel.
    Figure 2. The PenMount Icon

    1378

  4. The Control Panel dialog box appears. Double-click the PenMount 6000 icon on the Device tab.
  5. The calibration screen appears. Select the Standard Calibration button.
  6. Follow the onscreen instructions. Touch the screen at the five specified points to calibrate.