Home
Support
為什麼我的 PXI-665x Timing and Synchronization 板的 FPGA 沒有在 RIO Target 裡出現?
為什麼我的 PXI-665x Timing and Synchronization 板的 FPGA 沒有在 RIO Target 裡出現?
硬體: PXI/CompactPCI>>Platform Modules>>Timing and Synchronization>>PXI-6651, PXI/CompactPCI>>Platform Modules>>Timing and Synchronization>>PXI-6653, PXI/CompactPCI>>Platform Modules>>Timing and Synchronization>>PXI-6652
問題: 我的 PXI-6651,PXI-6652 或是 PXI-6653 都沒有出現在 LabVIEW FPGA RIO Target 裡
解答:
- 確定你有安裝 NI-Sync 1.2 或之後以及 NI-RIO 1.1.1 或之後。請上 ni.com/downloads 來下載這些最新的 driver
- 確定你的 665x 有被裝置管理員辨識到並且在 MAX 有出現在 PXI System 樹狀結構中
- 檢查 665x 的改訂板。如果你的是 Rev C 或更早之前 (Part number 標示為 xxxxxxC-xx ),這個版就是較早期的版本,FPGA 不接受她為 RIO 裝置 (Reconfigurable Input Output)。你可以到 這裡 買一個新的
- 2004 九月 以及之後的 NI-Sync User Manual 有說明將您的 665x 設定為 FPGA target。
- 如果您需要其他的技術支援,請到 ni.com/support 與工程師連絡
相關連結:
附加檔案:
報告日期: 03/11/2005
最後更新: 03/04/2009
文件偏號: 3JAF08D8
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.