Home
Support
Iniciando Solamente en LabVIEW Real-Time Después de Haber Utilizado NI Real-Time Hypervisor
Iniciando Solamente en LabVIEW Real-Time Después de Haber Utilizado NI Real-Time Hypervisor
Software Primario:
Versión de Software Primario: 2009
Versión de Software Primario Corregido: N/A
Software Secundario: N/A
Problema: Recientemente utilicé Hypervisor con mi PXI-8108/8110 y deseo arrancar el sistema directamente en LabVIEW Real-Time utilizando el BIOS. Después de arrancar, mi pantalla despliega el mensaje:
System state: No software installed. ¿Cómo arranco mi controlador en LabVIEW Real-Time?
Solución: Para utilizar LabVIEW Real-Time directamente después de haber utilizado Hypervisor, realice lo siguiente:
- En el BIOS, seleccione arrancar en LabVIEW RT Safe Mode
- Conectese al dispositivo desde Measurement and Automation Explorer desde un anfitrión remoto.
- En el dispositivo objetivo, debajo de la lista de Software, reinstale el componente LabVIEW Real-Time 2009.
- Reinicie el controlador.
- En el BIOS, seleccione arrancar en LabVIEW RT.
Ligas Relacionadas: KnowledgeBase 4YFEI84I: Frequently Asked Questions (FAQ) About the NI Real-Time HypervisorKnowledgeBase 2HEEPEZ8: Installing Software on Real-Time (RT) Series PXI Hardware
Archivos Adjuntos:
Día del Reporte: 08/14/2009
Última Actualización: 01/02/2010
Identificación del Documento: 50DF9GJ4
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.