在flexmotion-6c上使用老版本的固件
主要软件: Driver Software>>NI-Motion/FlexMotion
主要软件版本: 5.2
主要软件修正版本: N/A
次要软件: N/A
问题: 将flexmotion-6c的固件恢复到以前的版本,需要哪些步骤?
解答: 美国国家仪器并不推荐客户将FlexMotion-6c的固件恢复到以前的版本。如果你无法顺利执行下列操作,你需要将控制器寄回NI进行升级。
为了成功下载5.00.xxxx或者更早版本的固件到FlexMotion-6c。首先,从你的计算机卸载FlexMotion 5.0.3或更新版本的软件,然后保执行以下操作:
1、在MAX中,选中flexSafe.CPU,并将此文件作为下载到68311中的固件;
2、将flexSafe.cpu下载到FlexMotion-6c控制器;
3、安装FlexMotion软件5.0或者更早的版本;
4、先下载DSP固件到控制器,紧接着下载68331固件。
相关链接: Drivers and Updates: Older Versions of the FlexMotion Software
附件:
报告日期: 08/08/2001
最近更新: 08/24/2015
文档编号: 2C7A3HQ1
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.