Home
Support
為什麼我收到錯誤訊息-1074360282,當試著在Vision Development Module內使用我的相機?
為什麼我收到錯誤訊息-1074360282,當試著在Vision Development Module內使用我的相機?
主要軟體: Vision Development Module
主要軟體版本: 14.0
13.0
1.3
2.3
3.2.3
4.0
14.5
1.6.1
1.10
1.2
1.8
11.0.278
2.6
12.0.1
主要軟體修正版本: N/A
次要軟體: N/A
問題: 當我試著使用IMAQdx Open Camera.vi打開相機的reference,我卻收到錯誤訊息-1074360282,上面描述有可能的原因為"NI-IMAQdx: (Hex 0xBFF69026) 序號尚未被啟用"。然而我電腦中的 Vision Development Module已經被安裝且啟用了。
解答: 如同錯誤訊息所描述,這個相機的reference 沒有辦法被打開,因為IMAQdx的驅動程式還沒有被啟用。IMAQdx的驅動程式現在被包含在Vision Development Module (VDM)中。它包含了Vision Acquisition Software (VAS),與免費的 IMAQ 驅動程式不同的是,IMAQdx需要一個啟用的序號。參考以下步驟啟用Vision Acquisition Software:
- 開啟NI License Manager 在
開始>>所有程式>>National Instruments>>NI License Manager
- 在您的License Manager,找到Vision Acquisition Software (版本August 2014為例)
- 在Vision Acquisition Software 按右鍵並選擇 Activate
- 通過一般的啟用過程,使用您的序號或啟用碼做啟用
相關連結:
附加檔案:
報告日期: 04/02/2014
最後更新: 04/01/2015
文件偏號: 6K17PJNI
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.