Home
Support
¿Puedo Uilizar Guiones en el Nombre de un Switch?
¿Puedo Uilizar Guiones en el Nombre de un Switch?
Software Primario:
Versión de Software Primario: 3.6
Versión de Software Primario Corregido: N/A
Software Secundario: N/A
Hardware: Switches>>General-Purpose>>PXI-2564
Problema: Tengo un switch configurado en Measurement and Automation Explorer (MAX). ¿Puedo renombrarlo en un controlador tal como NI-DAQmx para tener un guión en el nombre?
Solución: Si el switch es llamado en una aplicación de desarrollo tal como LabVIEW, funcionará correctamente. El switch estará disponible como recurso de entrada en la función de inicialización.
Sin embargo, el Ni-SWITCH Soft Front Panel no trabajará con un guión en el nombre del recurso y ocurrirá el siguiente error:
Error -200055 "Measurements: Device identifier not specified in the list entry"
.
La forma de corregir este error es eliminando los guiones en el nombre del recurso.
Nota: Nombres de recursos que contengan guiones, funcionan bien con los Soft Panels de NI-DMM, NI-SCOPE, y NI-FGEN.
Ligas Relacionadas: KnowledgeBase 4R6ES99G: Find DAQmx Resource Name of a Switch from VISA AliasKnowledgeBase 4MJEIND4: Why Do I Get Error -1074118644 Using an NI Switch?
Archivos Adjuntos:
- Switch Name with Dash.JPG
- Switch Name with Underscore.JPG
Día del Reporte: 02/29/2008
Última Actualización: 04/23/2009
Identificación del Documento: 4ISDP2TZ
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.