Vision Acquisition Software and LabVIEW Compatibility
Overview
This page shows the supported versions of Vision Acquisition Software are required with LabVIEW. Reference this information to ensure you install the correct driver version when upgrading or updating your system, when migrating or porting code to a new system, or after the purchase and installation of new NI hardware. Using incompatible versions may result in errors, the inability for your operating system to recognize or detect and then find a driver for your device, or missing devices in NI Measurement & Automation Explorer (MAX).
Note: NI-IMAQ,NI-IMAQ I/O and NI-IMAQdx is part of the Vision Acquisition Software bundle and can't be downloaded separately.
Vision Acquisition Software
In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.
For information about NI driver and development software compatibility after 2023 Q1, please refer to NI Driver and Development Software Compatibility.
| Vision Acquisition Software | NI-IMAQ | NI-IMAQdx | NI-IMAQ I/O | NI-IMAQ IEEE 1394* | LabVIEW Version | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2023 Q1 | 2022 Q3 | 2021 SP1 | 2021 | 2020 SP1 | 2020 | |||||
| 2023 Q1 | 2023 Q1 | 2023 Q1 | 2023 Q1 | N/A | ||||||
| 2022 Q3 | 2022 Q3 | 2022 Q3 | 2022 Q3 | N/A | ||||||
| 21.0 | 21.0 | 21.0 | 21.0 | N/A | ||||||
| 20.6 | 20.6 | 20.6 | 20.6 | N/A | ||||||
| 20.5 | 20.5 | 20.5 | 20.5 | N/A | ||||||
| 20.0 | 20.0 | 20.0 | 20.0 | N/A | ||||||
| 19.5 | 19.5 | 19.5 | 19.5 | N/A | ||||||
| 19.0 | 19.0 | 19.0 | 19.0 | N/A | ||||||
| 18.5 | 18.5 | 18.5 | 18.5 | N/A | ||||||
| 18.0 | 18.0 | 18.0 | 18.0 | N/A | ||||||
*NI-IMAQ IEEE 1394 is a legacy product and was wrapped into the IMAQdx drivers in later Vision Acquisition Software versions.
Compatible
