This Document is not yet Rated

Rate this Document

Running Hardware Configuration Utility on PCMCIA-CAN Card Gives NI-DNET Error

Hardware: Industrial Communications>>CAN>>PCMCIA-CAN

Problem:
When I run the Hardware Configuration Utility on my PCMCIA-CAN card, I obtain the following error:

"The NI-DNET software does not support hardware shipped with older NI-CAN kits. If you wish to use NI-DNET, contact NI to upgrade your CAN hardware."

What's causing this error?

Solution:
The older PCMCIA-CAN cards (revision A and B) do not support the NI-DNET protocol stack, and you therefore will not be able to successfully run the Hardware Configuration Utility on this hardware. To determine what revision you have, check the part number on your hardware. The letter refers to the revision of your hardware. If you have revision A or B, please contact National Instruments to upgrade to the latest revision of the PCMCIA-CAN cards.

Related Links:

Attachments:





Report Date: 05/18/1998
Last Updated: 12/16/2005
Document ID: 19H8JHJW

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.