Adding Support for IVI to an Application Development Environment (e.g. CVI, LabVIEW, etc.)Primary Software: Instrument Drivers/IVI>>IVI Compliance PackagePrimary Software Version: 3.1 Primary Software Fixed Version: N/A Secondary Software: LabVIEW Development Systems, LabWindows/CVI Development Systems, Measurement Studio, TestStand, Instrument Drivers/IVI, Driver Software>>NI-RFSG
Problem: How can I add support for IVI to my Application Development Environment (ADE) such as LabVIEW or CVI? I first installed the NI RF Signal Generators Hardware Driver (which includes the IVI Compliance Package) and then later installed an ADE. When I try to add support for IVI to the ADE by modifying or repairing the IVI Compliance Package in the National Instruments Add/Remove Programs dialog I get the warning found below.
Solution: Now that the ADE is installed on your computer, it is important to re-install RF Signal Generators again from the original disk or installation files to add support to your Application Development Environment. Related Links: Drivers and Updates: RF Signal Generators Drivers and Updates: IVI Compliance Package On-Demand Training: IVI Fundamentals I - What Are IVI Drivers? (SSP required) On-Demand Training: IVI Fundamentals II - Why Use IVI Drivers? (SSP required) Attachments:
Report Date: 10/03/2007 Last Updated: 06/16/2009 Document ID: 4DGCOT9U |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
.