This Document is not yet Rated

Rate this Document

Internal Errors When Generating ELVIS SignalExpress Code in LabVIEW

Primary Software: Driver Software>>NI ELVIS Driver VIs
Primary Software Version: 1.0
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: Multifunction DAQ (MIO)>>Connector Blocks>>NI ELVIS II+, Multifunction DAQ (MIO)>>Connector Blocks>>NI ELVIS II

Problem:
When I try to generate code from a SignalExpress program that uses functions from the  NI-ELVIS or ELVISmx drivers, I receive a large number of internal errors.  Why is this and how do I fix it?

Solution:
With the NI-ELVISmx version 4.1.1 and Traditional ELVIS version 3.0.4 drivers, when you use the Code Generation function in SignalExpress, you will receive internal errors for each DAQmx step as shown in the error message below.  These internal errors are expected.  Simply choose Ignore Errors and the code generation will complete properly.  This is a known issue and will be fixed in a later release of the ELVIS drivers.

Related Links:
KnowledgeBase 490M8L84: LabVIEW SignalExpress Code Generation Errors After Updating LabVIEW and Drivers

Attachments:





Report Date: 06/01/2009
Last Updated: 06/03/2009
Document ID: 4Y0FREZL

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.