Why does my Scan Engine Code Return an Undefined Error?Primary Software: LabVIEW Modules>>Real-Time ModulePrimary Software Version: 8.5.1 Primary Software Fixed Version: N/A Secondary Software:
Problem: I am running code on my cRIO target that includes various Scan Engine VIs. Sometimes the Scan Engine VIs return an undefined error code. What do these errors mean? Solution: There are seven error codes associated with the NI Scan Engine that did not include defined error codes. They are listed below. -1950678964: Failed to load NI Scan Engine software required for IO Variable access. Please ensure that the NI Scan Engine is installed. -66457: The I/O Reference has changed, either due to a physical I/O configuration change or a deployed configuration change. To use the new configuration, you must use the Get I/O Info VI to create a new I/O Reference. -66432: The NI Scan Engine failed to initialize on time. It may function normally given sufficient time. If the scanned I/O in your application is not updating properly, contact National Instruments Technical Support. -66221: Cannot scale 64 bit integers. 1556: The reference is invalid. 1557: Duplicate references are being accessed at the same time. 1558: There is a type mismatch between the wire type and the reference's internal data type, probably a type cast error. To resolve this problem on the host, overwrite LabVIEW-errors.txt file at [NI DIR]\LabVIEW 8.6\resource\errors\English and [NI DIR]\RT Images\LabVIEW\8.6\Errors\English with the file of the same name in the Attachments section. To resolve this problem on the target, overwrite labview.err file at /c/ni-rt/system/errors/English/ with the file of the same name in the Attachments section. Related Links: Attachments:
Report Date: 08/05/2008 Last Updated: 08/05/2008 Document ID: 4O498AQ0 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
C:\Documents and Settings\mking\Desktop\LabVIEW-errors.txt