Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
1 ratings:
 3 out of 5     Rate this Document

Using SC-207x Signal Conditioning Accessories with M Series Data Acquisition (DAQ) Devices

Hardware: PXI/CompactPCI>>Controllers

Problem:
Can I connect the SC-207x signal conditioning accessories to M-Series DAQ boards? If so, how can I connect them?

Solution:
Only the SC-2070 and the SC-2075 can be used with M Series DAQ devices, including USB M Series devices.

To connect the SC-2070, the following accessories are needed:
  • A SHC68-68-EPM cable to connect to the M Series board
  • A 68M-50F MIO Cable Adapter to connect the NI cable to a standard 50-pin connector
  • A SC-2050 Cable Adapter board
  • A 50-pin ribbon cable
The SC-2075 connects directly to the M Series DAQ devices.



Related Links:
Product Manuals: SC-207X Series User Manual (November 1995)
Product Manuals: SC-2075 Signal Conditioning Accessory User Guide (April 2000)
KnowledgeBase 143F47QH: Connecting the Correct SC-207X Breadboard to an SCXI-1180 Feedthrough Panel
KnowledgeBase 3ECDRBPK:Can I Use M Series Boards With ER-8/16 Relay Module?
KnowledgeBase 3FDC9SNK: Using SSR Modules with M Series DAQ Devices
KnowledgeBase 3FDCUMNK: Using SC-204X Boards with M Series DAQ Devices
KnowledgeBase 3FDD52NK: Using SC-206X Boards with M Series DAQ Devices
KnowledgeBase 3FDDDJNK: Using BNC-208X Boards with M Series DAQ Devices

Attachments:


SC-207x.JPG - SC-207x.JPG


Report Date: 11/15/2004
Last Updated: 03/17/2009
Document ID: 3FEGFPK

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit