Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
This Document is not yet Rated  Rate this Document

Using the USB-1359 or SCXI-1359 Backplane Adapter

Hardware: SCXI>>Chassis>>4 Slot USB Mainframe, SCXI>>Chassis>>12-Slot USB Mainframe

Problem: I am using a NI 1359 but my modules are not being detected. Am I connecting my hardware correctly?

Solution:

The NI 1359 communication adapter provides an easy way to communicate with your SCXI switch chassis.  Two different communication options exist depending on the hardware you are using.  The SCXI-1359 allows you to connect your SCXI switch chassis to a NI 407x or 4060 DMM.  The USB-1359 allows you to control your SCXI switch chassis with a PC by using a USB cable.

Both the SCXI-1359 and the USB-1359 have a connection on the front that allows an external connection to a DMM or a PC.  The rear of the 1359 has a 10-pin connector that is used to make a connection to a compatible SCXI switch.  A switch module must be inserted into the slot where the 10-pin connector resides to make the connection between the SCXI chassis and the external controlling device (DMM or PC).  If a switch is not connected to the 10-pin connector, you will not be able to recognize any switch modules in your SCXI chassis.  Refer to Figure 1 to see where these connections are located.

Depending on where the USB-1359 is located, a compatible SCXI switch module will need to be in the same slot as the 10-pin connector.  If you have a 4-slot SCXI chassis you will need to use slot 2 or slot 4 depending on where the 1359 is installed.  For a 12-slot chassis the location of the USB-1359 may vary depending on how the backplane is installed so make sure the 10-pin connector is being used.

For more information about how to install and configure the NI Controller/Adapter Kit please refer to the product manual link below.


Figure 1: Backplane Adaptor Connectors



Related Links:
Products and Services: NI USB Switch Solutions
Product Manuals: NI 1357/1358/1359 SCXI Controller/Adapter Kit Installation Guide (April 2005)

Attachments:


1359.JPG - 1359.JPG



Report Date: 10/05/2006
Last Updated: 10/17/2006
Document ID: 424I6GE5

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit