This Document is not yet Rated

Rate this Document

Can I Perform Parallel Acquisition and Processing in Vision Builder for Automated Inspection (VBAI) Using the State Diagram?

Primary Software: Vision Builder for Automated Inspection
Primary Software Version: 3.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
I noticed that VBAI 3.0 introduced the new state diagram allowing me to create two or more transitions off of any state. Does this mean that I can process two or more images in parallel?

Solution:
The state diagram in VBAI offers the ability to make choices during an inspection. Any inspection will begin at the starting point of the state diagram, and follow along a single path to the finish. Therefore, only one image can be processed at a time in VBAI.

VBAI does offer a means to acquire images from multiple cameras. You can switch between any of the acquired images using the Select Image step, and then process those images in a sequence.

For more information on multiple camera acquisition, please refer to the Related Links section of this document.

Related Links:
KnowledgeBase 3QI67UVB: Can I Acquire Multiple Images in Vision Builder for Automated Inspection?


Attachments:





Report Date: 10/06/2006
Last Updated: 12/28/2006
Document ID: 425AH8BE

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.