Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
This Document is not yet Rated  Rate this Document

Using NI-CAN Channels with Third-Party CAN Hardware

Primary Software: Driver Software>>NI-CAN
Primary Software Version: 2.2
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: Industrial Communications>>CAN>>PCI-CAN

Problem:
I can't see my third-party CAN hardware in MAX and want to be able to use my NI-CAN channels. Is this possible?

Solution:
Third-party CAN hardware is not compatible with National Instruments' NI-CAN driver software. The NI-CAN driver was written specifically for National Instruments CAN hardware. Any feature of the NI-CAN driver, such as NI-CAN Channels that are created and configured in Measurement & Automation Explorer (MAX), will only work with CAN hardware from National Instruments. Likewise any third-party CAN hardware will not be visible to MAX so you will need to use the third-party software to configure your CAN hardware.

Related Links:
Product Manuals: NI-CAN Hardware and Software Manual and Specifications

Products & Services: Controller Area Network (CAN)

Attachments:





Report Date: 11/16/2004
Last Updated: 03/24/2009
Document ID: 3FF7ST7T

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit