This Document is not yet Rated

Rate this Document

Using the Real-Time System Replication Tools to Assign IP Addresses to Real-Time Targets

Primary Software: LabVIEW Modules>>Real-Time Module
Primary Software Version: 8.6
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
How do I assign an IP address to my Real-Time target programmatically?


Solution:
The Real-Time (RT) System Replication Tools provide a set of VIs that allow you to programmatically configure your Real-Time target, including assigning an IP address.  After installing the tools, right-click the block diagram and use User Libraries»RT System Replication»Set IP Address.vi to set the IP Address based on the target's MAC Address.

An example of programmatically assigning IP Addresses to unconfigured targets can be found here:  Developer Zone Community:  Programmatically Assigning IP Addresses to Real-Time Targets.  For more detailed information on the RT System Replication Tools, see the related links below.

Related Links:
Devleoper Zone Tutorial: Real-Time Target System Replication
LabVIEW Real-Time--System Replication Tools
Developer Zone Community:  Programmatically Assigning IP Addresses to Real-Time Targets

Attachments:





Report Date: 08/17/2007
Last Updated: 02/18/2009
Document ID: 4CG6JBMY

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.