1 ratings:

5 out of 5

Rate this Document

How Do I Create and Run a Simple Hypertend Object?

Primary Software: Lookout
Primary Software Version: 6.1
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem: I am looking into using HyperTrends in Lookout, but I cannot even get a simple Pot to show a line on the graph. How do I make this work.

Solution: There are two things that you must have before HyperTrends will work: Source - which can be anything that produces a graphable number, and Data Member - which should have logging enabled. This document will walk through the steps of creating a working HyperTrend object using a 'Pot' object as the data source.

1. Create a Pot Object - Object>>Create..>>Pot - Press OK through all of the boxes.
   

   



2. Edit Data Member Configuration - Right-Click Pot1 in Object Explorer and select "Edit Data Member Configurations...". Choose Value, make sure that Logging is enabled, and press save.
   

   

   
   
3. Create HyperTrend Object - Object>>Create...>>HyperTrend - URL = Pot1.Value
   

   

   
   

You should now see a red line plotting on the HyperTrend Object. Press CRTL-SPACE to enter 'Run Mode'. Changing the Pot should reflect on the graph.


Related Links:

Attachments:





Report Date: 03/20/2006
Last Updated: 05/15/2006
Document ID: 3VJD2IXJ

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.