What Are the Set Attributes Setting Codes for the FP-AI-112?Hardware: FieldPoint>>Analog I/O Modules>>FP-AI-112
Problem: I would like to programmatically set the range of a FP-AI-112. Since I am using a FP-1000/1001, the Set Attributes Optomux command (pg 5-9 FP-1000/1001 Programmer Manual) is the way to do this; however, the latest version of this manual is March 1999 and the FP-AI-112 is not listed. I need the range/settings table like the one provided on page 5-12 of the FP-1000/1001 Programmer Manual. Solution: The range/settings table for using the Set Attributes Optomux command with the FP-AI-112 is provided below.
Related Links: FP-1000/1001 Programmer Manual Attachments:
Report Date: 03/10/2005 Last Updated: 03/30/2005 Document ID: 3J8FOAEP |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
