Why is My FieldPoint RTD-PT100-3 Module Indicating an Open RTD?Hardware: FieldPoint>>Dual-Channel Modules>>FP-RTD-PT100-3
Problem: I know my RTDs are not faulty, yet both channels of my RTD-PT100-3 are indicating an open RTD. Solution: The problem is likely caused by incorrect wiring. Sometimes, the labeling on the FP-RTD-PT100 terminal labels are not positioned so that it is clear as to which terminal is which. The correct terminal positions are as shown below:
Related Links: NI FP-AI Series, NI FP-TC Series, NI FP-RTD Series Product Manuals Attachments: 
Report Date: 12/14/2004 Last Updated: 09/08/2008 Document ID: 3GDD3ANY |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
