From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.



NI-488.2 3.1 업데이트 세부사항



주요한 소프트웨어: Driver Software>>NI-488.2
주요한 소프트웨어 버전: 3.1
문제가 해결된 소프트웨어 버전: N/A
부차적인 소프트웨어: N/A

문제점:
NI-488.2 3.1 업데이트에서는 어떤 문제가 해결되었습니까?

솔루션:
이 업데이트에서는 아래의 6가지 문제가 해결되었으며, 모든 NI-488.2 설치 시 이 업데이트를 함께 설치할 것을 권장합니다.  이 업데이트에서는 Windows 8에 대한 지원도 추가됩니다.

NI-488.2 3.1 업데이트에서 해결된 문제
ID 설명
351266 NI-488.2 for Windows, Version 3.1, adds support for direct entry into ni4882.dll. Previously there was only support for gpib-32.dll.
311091 In certain PXI Express chassis, the performance of GPIB writes through PXI-GPIB interfaces is very slow. This has been fixed.
370676 When disconnecting a USB hub with GPIB hardware connected, the GPIB hardware will not be properly removed from the system. This will prevent the use of the device until the system is rebooted. During the following reboot or shutdown, a blue screen error may occur. This has been fixed.
371371 When disconnecting a USB hub shortly after connecting a GPIB-USB-HS to the hub, a blue screen error may occur immediately. This has been fixed.
144103 Removing PCMCIA-GPIB interfaces while Windows is hibernated or suspended causes blue screen error during resume. This has been fixed.
122048 GPIB interface remains in locked state after the locking process is terminated unexpectedly. This generates an ELCK error on subsequent attempts to open the interface. This problem impacted all USB based GPIB interfaces. This has been fixed.

이 업데이트는 업데이트 서비스 또는 아래의 드라이버 및 업데이트 링크에서 다운로드할 수 있습니다.

관련 링크:
드라이버 및 업데이트: NI-488.2 3.1

첨부:





리포트 날짜: 11/07/2012
마지막 업데이트: 11/16/2012
문서 번호: 62SDE6W5