Home
Support
為什麼我透過NI-8360B ExpressCard連接NI USRP RIO 裝置卻無法辨識?
為什麼我透過NI-8360B ExpressCard連接NI USRP RIO 裝置卻無法辨識?
硬體: PXI/CompactPCI>>Controllers>>ExpressCard-8360, Modular Instruments>>RF Measurement Devices>>NI Software Defined Radio>>NI USRP-2950R, Modular Instruments>>RF Measurement Devices>>NI Software Defined Radio>>NI USRP-2952R, Modular Instruments>>RF Measurement Devices>>NI Software Defined Radio>>NI USRP-2942R, Modular Instruments>>RF Measurement Devices>>NI Software Defined Radio>>NI USRP-2940R, Modular Instruments>>RF Measurement Devices>>NI Software Defined Radio>>NI USRP-2943R, Modular Instruments>>RF Measurement Devices>>NI Software Defined Radio>>NI USRP-2953R
問題: 我試著去連接我的NI USRP RIO裝置,可是在MAX中卻沒有顯示已經連接上裝置,我該怎麼解決?
解答: 為了解決這個問題,請先完成下列步驟:
- 確認您有將裝置以正確的順序開啟,您必須先將USRP開機,再來才是開啟您的電腦。
- 確認NI-USRP 1.3已經正確安裝,您可以在 開始>所有程式>National Instruments>NI-USRP>Documentation>NI-USRP Readme
確認您安裝的版本。
如果您完成以上步驟卻依舊無法在 NI MAX 下找到已連接的 NI USRP RIO,請連繫國家儀器技術支援 ni.com/support
相關連結: Products and Services: NI USRPDrivers and Updates: NI-USRP 1.3 National Instruments Support
附加檔案:
報告日期: 07/02/2014
最後更新: 06/20/2016
文件偏號: 6N1BJ3R4
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.