Missing Calibration Procedures In Calibration Executive Primary Software: Calibration ExecutivePrimary Software Version: 2.2 Primary Software Fixed Version: N/A Secondary Software:
Problem: I am attempting to use Calibration Executive to calibrate an SCXI module, such as the SCXI-1104C. The documentation says that the module is supported by Calibration Executive, but when I launch the Asset Configuration Wizard, the 1104C is not listed as an option. What is wrong? Solution: Only installed procedures show up in the Asset Configuration Wizard. If the specific procedure you are seeking is not listed, check to make sure it has been installed. Installed procedures have their own folder (C:\Program Files\National Instruments\Calibration Executive\Procedures\). If the folder for the device you want to calibrate is not there, then that procedure has not been installed. If you are missing a procedure that you need, you can easily install it. Open your Control Panel and choose Add or Remove Programs. In the list that comes up, select National Instruments Software and click Change. Select NI Calibration Executive from the list of software, and click the Modify button. This will launch the installer and let you select which calibration procedures you want to install. Related Links: NI Calibration Executive - Products and Services Attachments:
Report Date: 01/29/2004 Last Updated: 01/29/2004 Document ID: 35S79HFP |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
