This Document is not yet Rated

Rate this Document

CTR Buffer Read for DAQ-STC Counters Works Fine with Counter 1 but Gives Error -10920 with Counter 0

Primary Software: LabVIEW Development Systems>>Full Development System
Primary Software Version: 6.1
Primary Software Fixed Version: N/A
Secondary Software: Driver Software>>NI-DAQ
Hardware: Legacy DAQ Devices>>Multifunction DAQ>>AT-MIO-16E-10

Problem: I get error -10920 when I perform buffer read with counter 0 on AT-MIO-16E-10 (or any E-Series Board) using the Meas Buffered Pulse-Period (DAQ-STC).vi in LabVIEW. I can run this successfully on counter 1. The same VI works fine with counter 0 on a different board. Why?

Solution: You should be able to use both counters on the AT-MIO-16E-10 to perform buffered counting. If you see such a behavior, please download the latest version of NI-DAQ by following the link below.

Related Links: Drivers & Updates: NI-DAQ Driver

Attachments:





Report Date: 09/04/1998
Last Updated: 05/13/2004
Document ID: 1D3AORTS

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.