Why Do I Get IVI Error BFFA002E when using SwitchExecutive?Primary Software: Driver Software>>NI-SWITCHPrimary Software Version: 3.0 Primary Software Fixed Version: N/A Secondary Software: Switch Executive
Problem: When I try to access my switch with a SwitchExecutive configuration I get the following error message: Error -1074134994 occurred.What causes this? Solution: This error is caused by a missing NI-SWITCH driver component. It is possible to load and do many things in Switch Executive without having the appropriate driver installed correctly. This commonly points to not having the driver installed at all. It also may be possible to have a damaged install as well. To correct this, install or repair the installation of NI-SWITCH. The latest version of NI-SWITCH can be downloaded here. You can check to see if you have NI-SWITCH and repair it by going to Control Panel » Add and Remove Programs. Then select National Instruments Software and click Change/Modify. If NI-SWITCH is installed, then it will appear in this list. Related Links: Drivers and Updates: NI-SWITCH Products and Services: Switch Executive Attachments:
Report Date: 05/05/2009 Last Updated: 05/05/2009 Document ID: 4X4A54SL |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
