Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
This Document is not yet Rated  Rate this Document

Where Can I Find the NI Sync Block in Simulation Interface Toolkit 3.0.x?

Primary Software: LabVIEW Toolkits>>LabVIEW Simulation Interface Toolkit
Primary Software Version: 3.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
In the previous Simulation Interface Toolkit 2.0, I was able to place an NI Sync block to interface between Simulink and LabVIEW. I cannot seem to find that block anymore. How can I synchronize the output data from the Simulink model into LabVIEW?

Solution:
NI Sync was used with the Simulation Interface Toolkit (SIT) 2.0 and lower. The NI Sync block has been renamed to SignalProbe and is located under the NI Signal Probe library in Simulink. The LabVIEW Simulation Interface Toolkit uses the SignalProbe block to probe the signals in the model.

Note that the SignalProbe block must be on the top level of the model hierarchy. Also note that you can only have one SignalProbe block per model file. Make sure that you do not rename the SignalProbe block and do not change the name of another model block to SignalProbe. Click on the link below to learn more about how to create a mapping between the Simulink model and LabVIEW.

Related Links:
LabVIEW Simulation Interface Toolkit 3.0.x Help Files

Attachments:





Report Date: 02/05/2007
Last Updated: 08/17/2007
Document ID: 464HC90L

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit