This Document is not yet Rated

Rate this Document

Using Triggers and Relays in DASYLab

Primary Software: Other NI Software>>DASYLab
Primary Software Version: 6.00.03
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem: Using Triggers and Relays in DASYLab.

Solution: The following are links to various knowledgebases that describe different trigger/relay applications in DASYLab.

Related Links:

• How can I reduce the number of acquired samples based on the value?
  DASYLab Data Reduction with a Combi Trigger
  
  
• Using a combination of a Combi trigger and a Relay to reduce the number of data samples processed by DASYLab, is it possible to transmit some data samples before fulfilling the start condition and a some samples after fulfilling the stop condition?
  Pre-trigger and Post-trigger Settings in the DASYLab Combi Trigger Module
  
  
• How is it possible for DASYLab to control a relay depending on two different signals for start and stop?
  Start and Stop Condition on Different Data Channels using DASYLab
  
  
• For which DASYLab applications do I use the Never and Direct trigger conditions?
  Special DASYLab Trigger Conditions: Never and Direct
  
  
• What is the difference between the DASYLab "Signal Grows Above Level" and "Sample Greater Than Level " trigger conditions?
  DASYLab Trigger Conditions
  
  
• I want to trigger on a event only if it lasts for at least x seconds. How do I do this in DASYLab?
  Determining Event Duration for a Trigger using DASYLab
  
  
• DASYLab Support Page

Attachments:





Report Date: 09/09/2003
Last Updated: 12/07/2004
Document ID: 318FDT2G

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.