Error 2721 When Installing from Device Drivers CDPrimary Software: Driver Software>>NI-DAQPrimary Software Version: 7.3 Primary Software Fixed Version: N/A Secondary Software: Driver Software>>NI-HSDIO, Driver Software>>NI-DAQmx Base, Driver Software>>NI-Device, Driver Software>>NI-IMAQ for IEEE-1394, Driver Software>>NI ELVIS Driver VIs, Driver Software>>NI-DNET, Driver Software>>NI-DSA, Driver Software>>ValueMotion Software, Driver Software>>NI-VXI/VISA, Driver Software>>NI-DAQmx, Driver Software>>NI-IMAQ, Driver Software>>NI-DAQ, Driver Software>>NI-SWITCH, Driver Software>>NI-FieldPoint, Driver Software>>NI-Video, Driver Software>>NI-Motion/FlexMotion, Driver Software>>NI-VISA, Driver Software>>NI-Tuner, Driver Software>>NI-FGEN, Driver Software>>NI-RIO, Driver Software>>NI-Serial, Driver Software>>NI-CAN, Driver Software>>FieldPoint Explorer, Driver Software>>NI-435x, Driver Software>>NI-FBUS, Driver Software>>NI-488.2, Driver Software>>NI-DMM, Driver Software>>NI-SCOPE
Problem: I am attempting to install one of the drivers on my Device Drivers CD onto my computer. When I try to run the driver, I receive error 2721, and the installer stops. What do I need to do to make this work? Solution: Error 2721 occurs when you try to install an individual driver from the Device Driver CD. The drivers on this CD are designed to be installed by a single, high level installer. They are not designed to be installed as individual drivers. In order to install a single driver, go to the top level directory on the Device Driver CD and click on the setup.exe icon. This will start the high level installer, which will allow you to install individual drivers. Related Links: Attachments:
Report Date: 03/18/2004 Last Updated: 09/22/2004 Document ID: 37HJJ1QX |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
