How Do I Install LabVIEW Real-Time 6.1.1 on my FieldPoint ControllerPrimary Software: LabVIEW Modules>>Real-Time ModulePrimary Software Version: 6.1 Primary Software Fixed Version: N/A Secondary Software: N/A Hardware: Compact FieldPoint>>Controllers>>cFP-2010, Compact FieldPoint>>Controllers>>cFP-2110, Compact FieldPoint>>Controllers>>cFP-2200, Compact FieldPoint>>Controllers>>cFP-2120, Compact FieldPoint>>Controllers>>cFP-2100, Compact FieldPoint>>Controllers>>cFP-2020, Compact FieldPoint>>Controllers>>cFP-2000, FieldPoint>>Controllers/Network Modules>>FP-2010, FieldPoint>>Controllers/Network Modules>>FP-2015, FieldPoint>>Controllers/Network Modules>>FP-2000
Problem: I would like to install LabVIEW Real-Time 6.1.1 on my FieldPoint controller. How do I install this version of LabVIEW Real-Time from my host computer? Solution: Note: You must ensure that OS version 10.1 is on your controller in order to install LabVIEW Real-Time 6.1.1. It is not possible to downgrade the OS on your controller. Thus, if you have a newer version of the OS on your controller, you will need to use LabVIEW Real-Time 6.1.3 which you can get by installing LabVIEW Real-Time Support for LabVIEW Real-Time 6.1 from the FieldPoint 4.1.2 CD. To install LabVIEW Real-Time 6.1.1 on your controller, you must first install it onto your host computer. You should install the necessary software in the following order on a clean machine:
You can now install the software from your host computer onto your controller by following the instructions outlined in KnowledgeBase 2HHJ5N5F: How Do I Change the Version of LabVIEW Real-Time on the [c]FP-2xxx Module When Using MAX 3.0.x or Earlier?. Related Links: KnowledgeBase 2HHJ5N5F: How Do I Change the Version of LabVIEW Real-Time on the [c]FP-2xxx Module When Using MAX 3.0.x or Earlier? Attachments:
Report Date: 08/24/2007 Last Updated: 05/01/2008 Document ID: 4CNCQR3N |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
