Unable to set GPIB-1014-1S SYSFAIL light green on Heurikon CPU board, version V2FA.Hardware: GPIB>>Plug-in Controllers>>GPIB-1014
Problem: In a particular situation in which a Heurikon CPU board version V2FA was being used, there were problems encountered simply trying to set the SYSFAIL green on the GPIB-1014-1S. There was no problem using version V2F of the Heurikon board. Solution: Heurikon changed the way the reset is done on the master control in version V2FA of their CPU boards. This causes a problem and requires a patch (replacement PAL chip from Heurikon (Madison, WI)). Related Links: Attachments:
Report Date: 05/08/1996 Last Updated: 04/25/2003 Document ID: 0L7DO7DC |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
