This Document is not yet Rated

Rate this Document

Calibrating the NI 449x with DAQmx 8.7

Primary Software: Driver Software>>NI-DAQmx
Primary Software Version: 8.7
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:

I am using NI-DAQmx 8.7. When I try to self-calibrate my NI 449x device from MAX, I get an "Internal Software Error." When I try to calibrate the board using LabVIEW or Calibration Executive, I receive Internal Software Error -223043.

Solution:

An issue was identified with the NI 449x that causes these errors when trying to calibrate or self-calibrate the device. The attached zip files (see below) include a patch for DAQmx 8.7 and will address the issue. This issue is limited to DAQmx 8.7 and will be fixed in DAQmx 8.7.1 or later.

Installation Instructions:

• Download the attached zip file DAQmx87Patch.zip
• Unzip the file and run the "dsai.msi" installer
• If you are using a 64-bit windows operating system, you must also download and unzip DAQmx87Patch(64-bit).zip and run the "dsai64.msi" installer.
• After installation completes, reboot your system.

Related Links:

Attachments:





Report Date: 02/05/2008
Last Updated: 03/10/2008
Document ID: 4I4AOP7E

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.