Home
Support
FieldPoint 컨트롤러의 시작시 실행파일(startup executable) 생성하기
FieldPoint 컨트롤러의 시작시 실행파일(startup executable) 생성하기
주요한 소프트웨어:
주요한 소프트웨어 버전: 8.0
문제가 해결된 소프트웨어 버전:
부차적인 소프트웨어: N/A
하드웨어: Compact FieldPoint>>Controllers>>cFP-2010, Compact FieldPoint>>Controllers>>cFP-2120, Compact FieldPoint>>Controllers>>cFP-2000, Compact FieldPoint>>Controllers>>cFP-2020, Compact FieldPoint>>Controllers>>cFP-2100, Compact FieldPoint>>Controllers>>cFP-2130, Compact FieldPoint>>Controllers>>cFP-2110, Compact FieldPoint>>Controllers>>cFP-2200
문제점: FieldPoint 컨트롤러에서 실행할 VI를 만들었습니다. 이 VI를 제 컨트롤러가 시작할 때 실행되도록 심어놓고 싶습니다. LabVIEW 8.0 혹은 그 이상에서 어떻게 하면 되나요?
솔루션: 시작시 실행파일을 생성하기 위해 아래 단계와 같이 하면 됩니다.
- Project:프로젝트 제목»New»Add Targets and Devices»Existing Target or Device»Real Time FieldPoint»Select your target를 오른쪽 클릭해서 프로젝트 탐색기에 FieldPoint 뱅크를 추가합니다. 프로젝트에 RT 타겟을 추가하는 방법에 대해서는 아래 링크를 참고하세요.
- RT 타겟에 VI를 추가합니다.
- Build Specifications을 오른쪽 클릭하고New»Real-Time Application을 선택합니다.
- VI를 Source Files 섹션에 있는 Startup VIs 리스트에 추가합니다. 빌드 스펙 속성을 원하는대로 수정합니다. 다 되면, OK를 클릭합니다.
- 새로 생성된 빌드 스펙을 오른쪽 클릭하고 Set as startup을 설정합니다.
- 오른쪽 클릭하고 Build를 선택합니다.
- 오른쪽 클릭하고 Deploy를 실행합니다.
이 스텝을 완료하면 VI가 컨트롤러에 시작시 실행파일로 심어집니다. 아래 링크에 LabVIEW 8.0 이전 버전에서는 어떻게 하는지에 대한 설명이 있습니다.
관련 링크:
Product Manuals: Adding RT Targets to a LabVIEW ProjectDeveloper Zone Tutorial: How to Embed an Executable VI on a networked RT Series hardware
첨부:
리포트 날짜: 10/25/2006
마지막 업데이트: 11/09/2006
문서 번호: 42OKHIKG
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.