Addressing VXI-SC Channels In LabVIEW Hardware: VXI/VME/MXI>>VXI Signal Conditioning>>VXI-SC-1000
Problem: What is the correct syntax in order to address the Signal Conditioning modules in the VXI SC-1000 chassis? Solution: VXI-SC channels are addressed in a manner similar to SCXI. Use the syntax SCx ! MDy ! CHz, where x is the chassis number, y is the module number, and z is the channel number. All these parameters are defined in the NI-DAQ configuration utility. Each VXI-SC-1000 constitutes a single chassis, while each VXI-1102 and VXI-SC-1150 constitutes a module within its chassis. Related Links: Attachments:
Report Date: 03/06/1998 Last Updated: 04/04/2003 Document ID: 175818U0 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
