Where is Pin 14 on the SCC-68?Hardware: Multifunction DAQ (MIO)>>Connector Blocks>>SCC-68
Problem: If I look on the pin out for the SCC-68, there are 82 numbered screw terminals, but there is a Pin 83. According to the pin numbering on the SCC-68 and in the SCC-68 user manual, there is no Pin 14. Is this correct? Solution: Pin 14 on the supported M and E series devices for the SCC-68 maps to the +5V line. This line has been wired with the other +5V line (pin 8) on the SCC-68, so therefore, a +5v signal from the DAQ Card/external power is available on Pin 8. There is no seperate access to Pin 14. The numbering on the device and in the manual is correct. Related Links: Product Manuals: SCC-68 User Guide Attachments:
Report Date: 10/02/2006 Last Updated: 10/03/2006 Document ID: 421AF8WX |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
