"Acquire Until Trigger, Then Do" Does Not Work in Measure Primary Software: Other NI Software>>MeasurePrimary Software Version: 1.2 Primary Software Fixed Version: N/A Secondary Software: N/A
Problem: If you want to set up a hardware trigger in Measure 1.2 for Excel, you select "Analog Input Configuration" then "Trigger". If you try to select the option "Acquire until trigger, then do", it does not work. You can, however, check or uncheck "Start acquisition on trigger". In fact, if you click anywhere in the window (with the exception of the "scans after trigger" and "time-out" boxes), it seems to check or uncheck the "Start acquisition on trigger" box. This includes clicking on the "OK", "Cancel", or "Help" buttons. What's going on? Solution: This is a problem with Measure 1.2 that is fixed in the 1.2c update. This is a free update and can be downloaded from the URL given below in the Related Links section. Related Links: Measure Support Drivers and Updates: Measure 1.2c Update Attachments:
Report Date: 12/08/2000 Last Updated: 05/07/2004 Document ID: 247F3CDM |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
