Compatibility of Installer Built on 32-Bit System Including Daqmx Runtime with a 64-Bit System
Primary Software: Driver Software>>NI-DAQ
Primary Software Version: 7.6
Primary Software Fixed Version: N/A
Secondary Software: LabVIEW Toolkits>>LabVIEW Application Builder
When I build an installer that includes the NI-DAQmx runtime on a 32-bit development machine and then deploy it to a 64-bit machine, the NI-DAQmx runtime does not install. Why is this and how do I work around it?
Solution: In order to deploy an application to a 64-bit Windows system, there are two options:
In order to install the NI-DAQmx Runtime on a 64-bit machine, a certain 64-bit component must be included with the installer. If the installer is built on a 32-bit machine using LabVIEW Application Builder, this component is not included. As a result, the NI-DAQmx installer component is silently disabled during the installation.
Drivers and Updates: NI-DAQmx 9.1.1 Core Run-Time Engine
Drivers and Updates: NI-DAQmx 9.1.1 Configuration Run-Time Engine
Drivers and Updates: NI-DAQmx 9.1.1 Full
Report Date: 06/09/2010
Last Updated: 10/17/2017
Document ID: 5A8KPKZL