What Data Acquisition Boards Can I Use with BioBench?Primary Software: Other NI Software>>BioBenchPrimary Software Version: 1.2 Primary Software Fixed Version: N/A Secondary Software: N/A
Problem: What data acquisition boards can I use with BioBench? Solution: For BioBench 1.0: The boards that have been extensively tested as of 3/17/98 are these: AT-MIO-16E-10 Lab-PC+ Lab-PC1200 DAQCard-1200 DAQPad-1200 PCI-1200 PCI-MIO-16XE-50 AT-MIO-16XE-50 DaqCard-AI-16XE-50 DaqPad-MIO-16XE-50 In all reality, there are probably other boards that will work just fine (I think any MIO board should work) but these are the ones that we have tested with. For BioBench 1.2: Any analog input data acquisition board that is supported under NI-DAQ 6.9.1 should work. Note: BioBench is a legacy application that was developed before NI-DAQmx. Therefore it will not work with DAQ devices such as the M Series devices that are only supported in NI-DAQmx. See the link to the Data Acquisition Installation/Configuration Troubleshooter to determine which driver supports your device. Related Links: KnowledgeBase 1KFBHUYJ: How Do I Use BioBench with Newer Data Acquisition (DAQ) Boards, Such as the 6023E, 6024E, 6025E, 6034E, and 6035E? Support: Data Acquisition (DAQ) Installation/Configuration Troubleshooter Support: BioBench Support Attachments:
Report Date: 03/17/1998 Last Updated: 10/14/2005 Document ID: 17G9IJU9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
