When Do I Use the NB9 Cable and What is its Pinout? Hardware: Signal Conditioning Other>>SC Cable Adapters
Problem: I am using at data acquisition (DAQ) device and would like to connect the analog signals to a 5B module and the rest of the signals to a CB-50. Can I do this? Solution: You will want to use the NB9 cable with part number 180555-10. This cable strips off the analog signals and makes a 27 pin cable out of them to connect to the 5B backplane. The rest of the pins are part of a 50-pin connector that connects to the CB-50. Keep in mind that you will not have access to the analog input pins from the part of the cable connected to th CB-50. Related Links: Equipment for 5B Installation Attachments: 
Report Date: 04/24/1997 Last Updated: 10/29/2004 Document ID: 0WN7T95Q |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
